Tag Archives: gear box manufacturer

China manufacturer Transfer Rotor Pump/ Rotary Pump/ Lobe Pump with High Quality worm gear box assembly

Product Description

 Transfer Lobe Pump/ Rotor Pump/ Rotary Pump with Sanitary Grade

Comparison of several positive displacement pumps
Comparison content Rotor lobe pump Twin-screw pump Single screw pump
Suitable for
working conditions
Transfer viscosity medium or solid-liquid mixture. Transfer viscosity medium. Transfer viscosity medium or solid-liquid mixture.
Structural  Gap is kept between the rotors and between the rotors and the pump body, no friction, long life. There is a certain gap between the screws, but the wear of the front axle sleeve will cause the wear of the screw, the gap will become larger, and the flow rate and efficiency will decrease. Rubber stator is easy to wear.
Simple structure, low failure rate and convenient maintenance. There is a shaft sleeve in the front section, which is easy to wear and tear. The pump needs to be disassembled for replacement, and the maintenance is complex. There is a shaft sleeve in the front section, which is easy to wear and tear. The pump needs to be disassembled for replacement, and the maintenance is complex.
Spare parts Mechanical seal. Mechanical seal. Mechanical seal.
Seal ring. Seal ring. Seal ring.
No. Axle sleeve. Axle sleeve.
Long life, no need for spare. Long life, no need for spare. Long life, no need for spare.
Comprehensive comparison Simple structure, low failure rate and convenient maintenance, long life. The structure is complex, failure rate is high, maintenance is complex, maintenance cost is high, life is short . The structure is complex, failure rate is high, maintenance is complex, maintenance cost is high, life is short .
working principle The rotor pump adopts 2 synchronous rotors. The rotor is driven by a pair of synchronous gears in the box. Driven by the main and auxiliary shafts, the rotor rotates in the opposite direction synchronously, which changes the volume of the pump, thus forming a higher vacuum degree and discharge pressure.  A plurality of closed volumes are formed between the meshing screws and the shell, and each closed volume is 1 level. When the transmission shaft drives the main screw to rotate clockwise, the closed volume at the left end gradually forms, and the volume increases to the oil suction chamber; the closed volume at the right end gradually disappears, and the volume decreases to the oil pressure chamber.

Product features:

1. Gap is kept between the rotors and rotors & pump body, no friction, long using-life.  
2. Simple assembling and disassembling, easy to maintenance and clean, less easily-damaged parts.  
3. High efficiency and energy-saving, low failure, reliable sealing and low noise.   
4. In the same type pump, different type rotor can be interchanged.
5. Capable to pmp the viscous medium from 1cp to 2million cps.  
6. Capable of pumping mixture of gas, fluid and CZPT medium.  
7. Equipped with inverter, the flow can be adjusted as requirement of end-user.   
8. Flange, screw or clamp connection can be selected as required.  
9. Higher hygienic grade, support CIP, SIP. The surface roughness is 0.2–0.6mm, got 3A, FDA certification.  
10. Hygienic safety valve is built-in structure. 
 

Description Material Quantity
Pump cover 304 /304L /316 /316L 1
Pump body 304 /304L /316 /316L 1
Rotor Rubber /304 /304L /316 /316L 2
Main shaft 316-316L /42CrMo 1
Sub-shaft 316-316L /42CrMo 1
Mechanical seal seat 304 /304L /316 /316L 2
Mechanical seal SIC /Tungsten carbide 2
O-ring FKM /FFKM/ CZPT /TFE /PTFE,etc. 1
Rotor lock nut 304 /304L /316 /316L 2
Lip seal NBR /FKM 3

Working Principle of Lobe Pump

Technical parameters
Type Capacity for
tri-imepller rotor
(L/r)
Rotation speed
(r/min)
Flow
(m3/h)
Discharge Pressure
(MPa)
Standard I& O DN
(mm)
Enlarged I& O DN
(mm)
Weight
Bare pump
(kgs)
15TLS12-0.5C 0.04 10-720 2 1.2 15 25 30
25TLS12-2C 0.15 10-720 5 1.2 25 40 40
40TLS12-5C 0.32 10-500 10 1.2 40 50 50
50TLS12-10C 0.65 10-500 15 1.2 50 65 80
60TLS12-15C 1.1 10-500 20 1.2 65 80 120
65TLS12-20C 1.74 10-500 30 1.2 65 80 200
75TLS12-30C 2.6 10-500 40 1.2 80 100 230
80TLS12-40C 3.65 10-500 60 1.2 100 125 260
100TLS12-60C 5.2 10-500 80 1.2 125 150 400
125TLS12-80C 6.8 10-500 120 1.2 125 150 450
140TLS12-120C 9.8 10-400 150 1.2 150 200 600
150TLS12-150C 12.8 10-400 200 1.2 150 200 680
200TLS12-200C 16 10-300 300 1.2 200 250 780
250TLS12-300C 20 10-300 400 1.2 250 300 900
300TLS12-400C 30 10-300 500 1.2 300 350 1100

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Oversea Install Service
Warranty: 3
Mesh Form: Internal Engaged
Tooth Flank: Straight Tooth
Tooth Curve: Involute
Power: Electric
Customization:
Available

|

Customized Request

worm_reducer

Worm Reducer

Worm reducers are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer cannot achieve higher ratios than these.

Mechanics

A worm reducer is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducers are subject to break-in.
Worm gear reducers are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducers in low to medium-speed applications. However, the efficiency of worm gear reducers decreases with increasing ratios.

Sizes

Worm reducers come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducers available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducers are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducers can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm_reducer

Applications

The Worm Reducer market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducers have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer is comparable to other gear reducers. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducers are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer needs to be affordable. Generally, a worm reducer costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducers have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducers have become more desirable in today’s market.
Worm reducers are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducers, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm_reducer

Self-locking function

A worm reducer has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer is possible for two main reasons. First of all, a worm reducer uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducers can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China manufacturer Transfer Rotor Pump/ Rotary Pump/ Lobe Pump with High Quality   worm gear box assembly	China manufacturer Transfer Rotor Pump/ Rotary Pump/ Lobe Pump with High Quality   worm gear box assembly
editor by Dream 2024-05-16

China Professional MB Udl Variable Gear Box Reduction Stepless Motor Variator Speed Reducer manufacturer

Product Description

MB UDL Variable Gear box Reduction Stepless Motor Variator Speed Reducer

Product features:

1. High precision: 0.5-1
2. Wide speed range, the output speed ratio can be in 1/1.4 between 1/7
3. High intensity and long service life
4. Easy speed regulation
5. Continuous work, smooth operation, stable performance and low noise
6. Whole sealing and low requirement for environment
7. Compact organization and small size.
8. It is made of high quality aluminum alloy with beautiful appearance, light weight and no rusting.
9. Good adaptability. UDL series continuously variable transmission can combine with variable reducer units to realize low speed continuous variable speed.

Application areas: It can be widely used in food, packaging, chemical, pharmaceutical, plastic, papermaking, machine tools, transportation, and various kinds of automatic production lines and transmission lines which need to adjust speed.

Product photos:

 

Specification

Models Power Ratio O. Speed O.Torque O. Shaft Dia. O. Flange Dia.
UDL002 0.18KW 1.6~8.2 800~170rpm 1.5~3N.m Φ11 Φ140
UDL005 0.25KW 1.4~7 1000~200rpm 2.2~6N.m Φ14 Φ160
UDL005 0.37KW 1.4~7 1000~200rpm 3~6N.m Φ14 Φ160
UDL571 0.55KW 1.4~7 1000~200rpm 4~8N.m Φ19 Φ200
UDL571 0.75KW 1.4~7 1000~200rpm 6~12N.m Φ19 Φ200
UD571 1.1KW 1.4~7 1000~200rpm 9~18N.m Φ24 Φ200
UD571 1.5KW 1.4~7 1000~200rpm 12~24N.m Φ24 Φ200
UD030 2.2KW 1.4~7 1000~200rpm 18~36N.m Φ28 Φ250
UD030 3.0KW 1.4~7 1000~200rpm 24~48N.m Φ28 Φ250
UD030 4.0KW 1.4~7 1000~200rpm 32~64N.m Φ28 Φ250
UD050 5.5KW 1.4~7 1000~200rpm 45~90N.m Φ38 Φ300
UD050 7.5KW 1.4~7 1000~200rpm 59~118N.m Φ38 Φ300

Company Overview
  

Certificates

About Greensky Mechanical
 
HISTORY: Greensky is a mechanical brand of CZPT Power Co., Ltd. With over 10 years’
mechanical manufacturing experiences, CZPT Power always strictly stands on the
principle of Best Customer Satisfaction.

QUALITY: Material Inspection, Production Control, Finished Goods Test, Pre-dellivery Inspection

MISSION: “Once and forever” is our goal to serve customers in the world. Once we do
business with customer, we will do business forever.

MARKET30 different countries, mainly Germany, Austria, Japan, USA and Middle-East.

DELIVERY100% on-time delivery Guaranteed.

SERVICESFast response in English, German, Japanese and Chinese languages.

OEMCustomized orders are welcome at CZPT Power.

Exhibitions

FAQ

1 Q: What’s your MOQ for variator?
   A: 1unit is ok for testing purpose. 

2 Q: What about your warranty for your variator?
   A: One year.

3 Q: Do you provide OEM service with customer-logo?
   A: Yes, we could do OEM orders, but we mainly focus on our own brand.

4 Q: How about your payment terms ?
   A: TT, western union and paypal. 100% payment in advanced for orders less $5,000. 30% deposit and balance before delivery for orders over $5,000.

5 Q: How about your packing ?
   A: Carton, Plywood case. If you need more, we can pack all goods with pallet 

6 Q: What information should be given, if I buy reducer from you ?
   A: Rated power, gearbox ratio, input speed, mounting position. More details, better!

7 Q: How do you deliver the speed variator?
   A: We will compare and choose the most suitable ways of delivery by sea, air or express courier.

We hope you will enjoy cooperating with us.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: No Gear
Step: Stepless
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm_reducer

Worm gear reducer

A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm_reducer

application

The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm_reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China Professional MB Udl Variable Gear Box Reduction Stepless Motor Variator Speed Reducer   manufacturer China Professional MB Udl Variable Gear Box Reduction Stepless Motor Variator Speed Reducer   manufacturer
editor by Dream 2024-05-14

China manufacturer Three-Stage Gear Reducer Stepless Speed Variator worm gear box assembly

Product Description

Product Description

JWB Series Speed Variator 

1. Features:

 JWB-X  type

  • Sizes: ≥04
  • Power up to 1.5 kW or more
  • Cases in RAL 5571 blue cast iron
  • Shafts: case hardened and tempered steel.
  • Internal components: heat-treated steel
  • Output speed with 4 pole(1400r/min) motors: 2-10r/min;4.7-23.5r/min;15-75r/min;20-100r/min, 28-140r/min, 30-150r/min;40-200r/min;60-300r/min;80-400r/min;100-500r/min;190-950r/min.
  • Output Torque value max 1002Nm
  • Silent, vibration-free running
  • Bidirectional rotation
  • Control handwheel positionable on either side
  • Slipping speed to max load at 5% 
  • Regulation sensibility: 0,5 rpm 
  • Painted with blue epoxy-polyester powder 

 JWB-X B type

  • Sizes:01,02,03 and 04
  • Power up to 1.5 kW or less
  • Cases in die-cast aluminium alloy
  • Shafts: case hardened and tempered steel.
  • Internal components: heat-treated steel
  • Output speed with 4 pole(1400r/min) motors: 2r/min-20r/min;4.7r/min-23.5r/min;6.5-32.5r/min, 8-40r/min, 9-45r/min, 13-65r/min, 15r/min-75r/min;18-90r/min, 25-125r/min, 28r/min-140r/min;40r/min-200r/min;60r/min-300r/min;80r/min-400r/min;100r/min-500r/min;190r/min-950r/min.
  • Output Torque value max 795 Nm
  • Silent, vibration-free running
  • Bidirectional rotation
  • Control hand wheel positionable on either side
  • Slipping speed to max load at 5%
  • Regulation sensibility: 0,5 rpm
  • Painted with blue epoxy-polyester powder 

2. Technical parameters

 

Type Output Torque Output Shaft Dia.   Output Speed Range 2rpm-950rpm
SWB01 2.6-1.6N.m φ11 Applicable Motor Power 0.18kW-7.5kW
SWB02 258-1.8N.m φ14,φ24,φ28,φ32  
SWB03 426-4N.m φ24,φ28,φ38 Input Options With Inline AC Motor
SWB04 795-8N.m φ28,φ38,φ42 With IEC Motor
SWB05 535-16N.m φ38,φ48,φ55 With Input Shaft
SWB06 1002-40N.m φ42,φ55,φ70 With Input Flange

About Us

ZheJiang CZPT Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CZPT specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CZPT and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
product is a product inspection to determine the qualified products.

7. Certification.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Customization:
Available

|

Customized Request

worm_reducer

Worm gear reducer

A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm_reducer

application

The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm_reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China manufacturer Three-Stage Gear Reducer Stepless Speed Variator   worm gear box assembly	China manufacturer Three-Stage Gear Reducer Stepless Speed Variator   worm gear box assembly
editor by CX 2024-04-10

China Hot selling Jwb Series Stepless Speed Variator Manufacturer worm gear box assembly

Product Description

JWB Series Speed Variator 
1. Features:

 JWB-X  type

  • Sizes: ≥04
  • Power up to 1.5 kW or more
  • Cases in RAL 5571 blue cast iron
  • Shafts: case hardened and tempered steel.
  • Internal components: heat-treated steel
  • Output speed with 4 pole(1400r/min) motors: 2-10r/min;4.7-23.5r/min;15-75r/min;20-100r/min, 28-140r/min, 30-150r/min;40-200r/min;60-300r/min;80-400r/min;100-500r/min;190-950r/min.
  • Output Torque value max 1002Nm
  • Silent, vibration-free running
  • Bidirectional rotation
  • Control handwheel positionable on either side
  • Slipping speed to max load at 5% 
  • Regulation sensibility: 0,5 rpm 
  • Painted with blue epoxy-polyester powder 

 JWB-X B type

  • Sizes:01,02,03 and 04
  • Power up to 1.5 kW or less
  • Cases in die-cast aluminium alloy
  • Shafts: case hardened and tempered steel.
  • Internal components: heat-treated steel
  • Output speed with 4 pole(1400r/min) motors: 2r/min-20r/min;4.7r/min-23.5r/min;6.5-32.5r/min, 8-40r/min, 9-45r/min, 13-65r/min, 15r/min-75r/min;18-90r/min, 25-125r/min, 28r/min-140r/min;40r/min-200r/min;60r/min-300r/min;80r/min-400r/min;100r/min-500r/min;190r/min-950r/min.
  • Output Torque value max 795 Nm
  • Silent, vibration-free running
  • Bidirectional rotation
  • Control hand wheel positionable on either side
  • Slipping speed to max load at 5%
  • Regulation sensibility: 0,5 rpm
  • Painted with blue epoxy-polyester powder 

2. Technical parameters

 

Type Output Torque Output Shaft Dia.   Output Speed Range 2rpm-950rpm
SWB01 2.6-1.6N.m φ11 Applicable Motor Power 0.18kW-7.5kW
SWB02 258-1.8N.m φ14,φ24,φ28,φ32  
SWB03 426-4N.m φ24,φ28,φ38 Input Options With Inline AC Motor
SWB04 795-8N.m φ28,φ38,φ42 With IEC Motor
SWB05 535-16N.m φ38,φ48,φ55 With Input Shaft
SWB06 1002-40N.m φ42,φ55,φ70 With Input Flange

About Us

ZheJiang CZPT Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CZPT specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CZPT and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
product is a product inspection to determine the qualified products.

7. Certification.

Packing

Delivery

Application: Motor, Machinery, Marine
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Planetary
Type: Planetary Gear Reducer
Customization:
Available

|

Customized Request

worm_reducer

Advantages and disadvantages of worm gear reducer

If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.

Hollow shaft worm gear reducer

Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer

The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm_reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer

R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm_reducer

AGKNX Electric Worm Gear Reducer

AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Hot selling Jwb Series Stepless Speed Variator Manufacturer   worm gear box assembly	China Hot selling Jwb Series Stepless Speed Variator Manufacturer   worm gear box assembly
editor by CX 2023-05-22

China manufacturer Smr Series Shaft Mounted Gear Box Vertical Drive Helical Bevel Motor Reduction Gearbox Speed Reducers for Conveyor System Great quality

Product Description

 

SMR Sequence Shaft Mounted Gear Box Vertical Push Helical Bevel Motor Reduction Gearbox Pace Reducers For Conveyor Method


Comp1nts:
1. Housing: Higher-power Gray Forged Iron Gearboxes
2. Gears: Helical Involute Gears, Carburizing, Quenching, Grinding
three. Shafts: Higher-toughness Hardening Alloy Metal
four. Enter Configurations: Keyed Sound Shaft Enter
five. Output Configurations: Keyed Hollow Shaft Output
6. Oil Seal: Double Lips Skeleton Seal
seven. Spare Components: Torque arm, CZPT Backstop

Types:
one Stage(Ratio 5): B05, C05, D05, E05, F05, G05, H05, J05
2 Phase(Ratio 13/20): B13/twenty, C13/twenty, D13/20, E13/20, F13/20, G13/twenty, H13/twenty, J13/twenty
Functions:
1. Substantial strength of equipment box, gears and shafts, durable and resilient
two. 2 metric output shaft bore diameters(Standard and Optional)
3. CZPT backstop to avoid backdriving. Backstop is not suggested for the gear ratio 5
4. Double lips skeleton oil seal brings together the features of seal and dust-proof
five. Widely employed in belt conveyor and pulley drive method

Applications:
Conveyors in Mine, Quarry, Gravel Transport, Baggage & Bulk Handling, Animal Feeding, and many others.

Installation:
one. Hanging Shaft Mounted
2. Output Flange MountedLubrication:
Oil-bathtub and Splash

Lubrication
Lubricating Oil: Mineral Oil and Artificial Oil
Intense stress oil is not recommended, except if in situation of with backstop

Cooling:
Normal Cooling

  

Types

Output Shaft Bore

Max. Torque*

Nominal Ratio

Regular

Optional

SMR-B

30mm

40mm

277N.m

five
13
twenty

SMR-C

40mm

50mm

468N.m

SMR-D

50mm

55mm

783N.m

SMR-E

55mm

65mm

1194N.m

SMR-F

65mm

75mm

1881N.m

SMR-G

75mm

85mm

2970N.m

SMR-H

85mm

100mm

4680N.m

SMR-J

100mm

120mm

7449N.m

Associated Merchandise

Organization Information

 

These compact, lightweight, low backlash inline equipment reducers ended up at first developed for encoder applications. They are also suited for several other generate systems. Encoder equipment reducers have a quite low instant of inertia at the shaft input and are rated for enter speeds up to 3000 rpm. Two body measurements are offered with equipment ratios from 4.96:1 to 3600:1. Our encoder gearbox sync pads are obtainable from stock.
Gear reducers are also named reducers. Mechanical add-ons, by possibly of these two names, are made to decrease the electrical power transferred between the motor and the device between the rotational speeds (revolutions per minute). The reducer successfully lowers the rotational speed produced by the motor, therefore managing the speed at which the machine operates and increasing the torque developed by the motor. Multiplying the torque made by the motor increases the machine’s accessible energy – a approach acknowledged as “mechanical dominance”. In a more substantial context, gear reducers are fundamentally instruments utilised to improve the effectiveness of tools operation.

China manufacturer Smr Series Shaft Mounted Gear Box Vertical Drive Helical Bevel Motor Reduction Gearbox Speed Reducers for Conveyor System     Great quality

China supplier R Series Motor Speed Reducer Reverse Gear Box for Buggy Industry in Line Shaft Coaxial Geared Motors Motors Auto Part Reducer Transmission Part manufacturer

Merchandise Description

R collection motor pace reducer helical gearbox electrical reverse gear box for buggy industry in line shaft Coaxial geared motors car component reducer transmission

 R helical concentric gearbox speed reducer decelerator has the characteristics of high flexibility,very good mixture and heavy loading capability, together with other merits this kind of as easy to attain various transmission ratios, substantial efficiency, low vibrationand substantial permissible axis radial load. This series can not only be combined with a variety of varieties of reducers and variators and satisfy the specifications, but also beadvantage of localization of associated transmission gear.
one) Output pace: .6~1,571rpm
2) Output torque: up to 18,000N.m
3) Motor electricity: .18~160kW
four) Mounted form: foot-mounted and flange-mounted mounting

Solution Identify SLR Sequence  Rigid Tooth  helical reducer 
Gear Material 20CrMnTi 
Scenario Substance HT250
Shaft Material  20CrMnTi
Equipment Processing Grinding complete by HOFLER Grinding Equipment
Color  Custom-made
Noise Examination Bellow 65dB

 

business details
 


Equipment reducers are also known as reducers. Mechanical accessories, by both of these two names, are made to lessen the electricity transferred in between the motor and the equipment among the rotational speeds (revolutions for each moment). The reducer properly decreases the rotational velocity made by the motor, therefore controlling the speed at which the device operates and escalating the torque developed by the motor. Multiplying the torque developed by the motor boosts the machine’s offered power – a procedure identified as “mechanical dominance”. In a more substantial context, gear reducers are basically tools utilised to improve the effectiveness of equipment procedure.
Underneath is a checklist of our presently available industrial gearboxes. If you cannot find what you are seeking for, remember to get in touch with the manufacturing unit for far more alternatives. At EP, we are continually establishing new items and retrofitting aged ones to meet up with consumer demands.

China supplier R Series Motor Speed Reducer Reverse Gear Box for Buggy Industry in Line Shaft Coaxial Geared Motors Motors Auto Part Reducer Transmission Part     manufacturer

China manufacturer Factory Wholesale Wp Series Worm Gearbox with Single/Double Speed Gear Box Reducer Reduction Cast Iron High Torque Transmission (Wpa/Wps/Wpx/Wpo) Hot selling

Merchandise Description

Merchandise Description

 

Firm Profile

In 2571, HangZhou CZPT Machinery Co.,ltd was proven by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou city(ZHangZhoug province, China), all 3 Founders are engineers who have far more than averaged thirty many years of experience. Then since the needs of company growth, in 2014, it moved to the current Xihu (West Lake) Dis. Industrial Z1 (HangZhou metropolis, ZHangZhoug province, China).

Through our effectively-acknowledged model ND, CZPT Machinery provides agricultural solutions to agriculture machinery manufacturer and distributors globally by way of a entire line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, generate shafts, sheet metallic, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators etc. Products can be customized as request.

We, CZPT equipment proven a comprehensive quality management technique and revenue support ne2rk to offer clientele with substantial-good quality merchandise and satisfactory service. Our goods are marketed in 40 provinces and municipalities in China and 36 countries and areas in the world, our primary marketplace is the European industry.

Our manufacturing unit

Our sample space

Certifications

Why decide on us?

1) Customization: With a strong R&D crew, and we can produce goods as necessary. It only requires up to 7 days for us to style a established of drawings. The manufacturing time for new goods is usually fifty days or much less.

2) High quality: We have our own total inspection and screening equipment, which can ensure the good quality of the goods.

3) Capacity: Our annual production capability is over five hundred,000 sets, also, we also settle for small quantity orders, to fulfill the wants of distinct customer’s purchase portions.

4) Support: We focus on offering higher-good quality items. Our goods are in line with international specifications and are mainly exported to Europe, Australia, and other countries and areas.

5) Cargo: We are shut to HangZhou and ZheJiang ports, to supply the speediest transport service.

Packaging & Shipping and delivery

FAQ

Q: Are you a trading organization or company?
A: We are manufacturing facility and delivering gearbox ODM & OEM services for the European market place for a lot more than 10 a long time

Q: Do you supply samples? is it cost-free or extra?
A: Sure, we could supply the sample for free cost but do not shell out the price of fr8.

Q: How prolonged is your shipping time? What is your phrases of payment?
A: Usually it is 40-45 days. The time may possibly differ based on the item and the stage of customization.
For common products, the payment is: thirty% T/T in advance,harmony ahead of cargo.

Q: What is the specific MOQ or price tag for your product?
A: As an OEM company, we can supply and adapt our products to a broad selection of needs.
Therefore, MOQ and cost may greatly vary with size, content and more specifications For instance, pricey merchandise or regular merchandise will generally have a lower MOQ. Remember to get in touch with us with all relevant particulars to get the most correct quotation.

If you have yet another question, you should really feel free of charge to speak to us.

Gearboxes are mechanical products that assist push systems sustain optimum pace and torque for programs. Also identified as gearboxes and equipment drives, they minimize the rotational pace of the input shaft by a specified proportion and boost the electrical power shipped to the output shaft by the very same proportion. Ratio multipliers boost the deceleration and torque supplied by the reducer by a specified ratio and are appropriate for parallel installations. Mounting bases, torque arms and flange couplings are components utilised with the reducer. They are generally utilized in apps exactly where the reducer is not directly linked to the drive mechanism.
When looking at a reducer vs a gearbox, usually the only big difference is terminology. This is simply because all reducers are gearboxes. Nonetheless, not all gearboxes are retarders. This may possibly audio complex, but it really is truly quite straightforward. A reducer is a equipment established amongst the motor and the equipment. The goal of the reducer is to reduce the rotational speed transferred among these two endpoints. The reducer amplifies and multiplies the torque (input) made by the motor. 2nd, a reducer, as the name implies, decreases the speed of the input (output in rpm) so that the output is the correct speed. The time period “gearbox” is just a generic term used for the gear practice between the motor and the device. Therefore, all reducers are gearboxes. However, not all gearboxes lessen input speed. Even though unusual, gearboxes can actually increase input speeds. By much the most common kind of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.

China manufacturer Factory Wholesale Wp Series Worm Gearbox with Single/Double Speed Gear Box Reducer Reduction Cast Iron High Torque Transmission (Wpa/Wps/Wpx/Wpo)     Hot selling

China high quality Industrial CZPT Marine Gearbox D300A for Marine Engine Gear Box manufacturer

Item Description

 

 

Product Description

HangZhou CZPT MA125 Gearbox

 

HangZhou CZPT produces the very best gearbox in China.

The 120C maritime gearbox is suitable for small and medium-sized substantial velocity boats these kinds of as yachts, cargo ships, passenger ships and other kinds of vessels. It is capable of decelerating velocity, reversing clutch route and bearing propeller thrust. The 120C gearbox has a modest dimensions, a massive speed ratio and a gentle w8 and can be matched with large-velocity engine to form a maritime electrical power unit.

 

 

Merchandise Parameters

Enter Speed  1500~3000r/min
Reduction Ratio (i) 2.03,2.46 Transmission Capacity  (kW/r/min) .02
3.04 .018
three.57 .016
4.05 .014
4.39 .013
four.seven .011
Maneuver Type  Push-pull flexible Shaft 
Center Distance  125mm
Rated Thrust  5.5KN
L×W×H  291*454*485mm
Web W8   115kg
Coupling Flywheel  SAE 11.5/ten
Coupling Housing  SAE 2/3/4
Characteristics AT A Look

Superior Technological innovation

Compact Composition

Extensive Applicability

Large Dependability

Very good Maintainability

Item Configuration

Personalize YOUR Equipment

Oil Stress Gauge and CZPT System

Oil Temperature Gauge and CZPT Gadget

SAE Flywheel Housing Choices

Hydraulic Pressure Minimal CZPT

Solenoid Managed Swap

…….

 

Make contact with US FOR More Information YOU Need to have!

 

 

Business Profile

 

HangZhou LionHeart Energy Products Co., Ltd., a subsidiary of 1 of the nation’s top maritime solutions organization —- HangZhou Agricultural Equipment Co., Ltd., is a provider of maritime gear throughout the world. Our organization is fully commited to delivering the very best remedy to our customer’s undertaking since 1996. With more than 20 a long time of profound expertise in the marine providers industry, our firm has set up a specialist and customer-helpful system in our each and every pre-revenue, shipping and delivery and right after-product sales procedure to ensure your fret-cost-free buying encounter. We ship our model-new products all above the planet, at the greatest charges on the Web.

LionHeart Energy is a professional provider for gear like maritime engines, generators, gearboxes, propellers, maritime interior fit-out, deck equipment and associated marine spare parts. Our processes and methods are created to existing the ideal merchandise that will meet or CZPT the expectations of each 1 of our clients. We back again up that dedication with comprehensive services by means of the product’s complete existence cycle, together with our key systems and top solution skills. That is the explanation why we stand out as the nation’s marine gear sales winner of numerous makes for above 10 consecutive several years.

LionHeart Electrical power carries 1 of the nation’s greatest inventories of marine tools and connected components from twenty+ makers this sort of as Weichai, HangZhou Progress, Deutz, Steyr, Zichai, SDEC and more, amongst which the CZPT and CZPT sequence are entirely coated. Specifically, that stock is meticulously arranged more than 57 acres outside and 118, 000 sq. FT. Of warehouse below roof. That indicates our merchandise are normally in inventory for fast availability. Besides, we are proud of our resource plHangZhou method of goods, which is unparalleled in the sector, giving you the shortest direct time and productive provider.

LionHeart Power’s personnel is expertly educated not only to swiftly find the products you happen to be looking for, but also to satisfy your project specifications with the very best answer. If what you are looking for is not ‘on the shelf’, we will customize it for you. This energy builds upon our sound partnership with numerous makers and creation institutes. Effectiveness and provider are the ambitions of each member of our firm. LionHeart Energy is aware your time is worthwhile and we make this value for you. High quality gear and expertly-qualified service specialists, mixed with our ex10sive inventory, give you the edge in your business and industrial accomplishment.

 

Certifications

 

Production approach

 

 

Packaging & Shipping and delivery

 

FAQ

 

1.Processing
Orders are typically packed and prepared to ship in 1 to 3 enterprise days if the products are in inventory. Nevertheless shipments are subiect to needed manufacturing time and customs clearance procedures. which can trigger delays outside of original supply estimates. For comprehensive shipping data, you should make contact with buyer service.
two.Packing Strategies
Generally we use picket boxes for packaging or we can pack it in accordance to your special wants.
3.Shipping Techniques
We are satisfied to provide a selection of shipping methods. Transport techniques available: EXW. FOB.CER. CIF.
4. Global Returns & Exchanges
However we cannot settle for retums on intemational orders. We will check every solution prior to dellverv 1-calendar year company guarantee is quaranteed on our total devices and 3 months on spare components. I1 you have any worries with your order, make sure you get to out to client provider
five.Payment Approaches
We sugqest 50/fifty T/T payment method: fifty per cent down payment on placement of the buy, with the remaining fifty% owing upon cargo. We also settle for L/C, Trade Assurance, Visa transfer and Paypal

 

Proper angle gearboxes (worm and planetary gears) are sturdy and can be used for 90° turns. An inline reducer (parallel shaft and planetary) is an perfect matching motor with high enter speeds, or when equipment motor effectiveness is crucial. Speak to our complex revenue personnel to support establish which transmission remedy is best for you.
When hunting at a reducer vs a gearbox, usually the only difference is terminology. This is since all reducers are gearboxes. However, not all gearboxes are retarders. This could sound complex, but it really is truly fairly basic. A reducer is a equipment established in between the motor and the equipment. The goal of the reducer is to minimize the rotational pace transferred among these two endpoints. The reducer amplifies and multiplies the torque (enter) created by the motor. Second, a reducer, as the name suggests, reduces the velocity of the enter (output in rpm) so that the output is the correct velocity. The term “gearbox” is just a generic phrase utilised for the equipment prepare among the motor and the machine. For that reason, all reducers are gearboxes. Nonetheless, not all gearboxes decrease input velocity. Although unheard of, gearboxes can truly enhance input speeds. By considerably the most common sort of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.

China high quality Industrial CZPT Marine Gearbox D300A for Marine Engine Gear Box     manufacturer

China Best Sales Worm Gearbox with Cast Iron Housing Single Double Speed Gear Box Reducer Reduction for Electric Motor (Wpa Wpx Wpo Wpda) manufacturer

Solution Description

Item Description

 

Organization Profile

In 2571, HangZhou CZPT Equipment Co.,ltd was proven by Ms. Iris and her two companions(Mr. Tian and Mr. Yang) in HangZhou metropolis(ZHangZhoug province, China), all three Founders are engineers who have a lot more than averaged thirty a long time of knowledge. Then due to the fact the specifications of organization growth, in 2014, it moved to the current Xihu (West Lake) Dis. Industrial Zone (HangZhou town, ZHangZhoug province, China).

By means of our effectively-acknowledged brand name ND, CZPT Equipment provides agricultural solutions to agriculture machinery producer and distributors around the world by way of a complete line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, generate shafts, sheet metallic, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and many others. Items can be tailored as ask for.

We, CZPT machinery recognized a total good quality administration technique and revenue provider community to offer clients with higher-quality merchandise and satisfactory support. Our merchandise are sold in 40 provinces and municipalities in China and 36 countries and regions in the globe, our major market is the European industry.

Our factory

Our sample place

Certifications

Why choose us?

one) Customization: With a powerful R&D staff, and we can build merchandise as essential. It only takes up to 7 days for us to design a set of drawings. The generation time for new items is normally fifty times or less.

two) Good quality: We have our very own total inspection and tests gear, which can make sure the good quality of the merchandise.

three) Capacity: Our yearly generation potential is above 500,000 sets, also, we also accept modest quantity orders, to meet up with the requirements of distinct customer’s buy portions.

4) Provider: We focus on offering high-quality items. Our items are in line with intercontinental expectations and are primarily exported to Europe, Australia, and other nations around the world and areas.

five) Shipment: We are near to HangZhou and ZheJiang ports, to provide the speediest transport services.

Packaging & Shipping

FAQ

Q: Are you a trading firm or producer?
A: We are manufacturing facility and providing gearbox ODM & OEM companies for the European market for a lot more than 10 several years

Q: Do you offer samples? is it cost-free or further?
A: Of course, we could supply the sample for free cost but do not shell out the value of freight.

Q: How lengthy is your shipping and delivery time? What is your phrases of payment?
A: Generally it is 40-45 days. The time may possibly differ based on the item and the amount of customization.
For common products, the payment is: thirty% T/T in advance,balance prior to shipment.

Q: What is the specific MOQ or value for your item?
A: As an OEM company, we can give and adapt our items to a extensive assortment of demands.
Thus, MOQ and price tag might significantly differ with size, substance and additional requirements For instance, costly items or common goods will generally have a reduced MOQ. You should make contact with us with all appropriate particulars to get the most exact quotation.

If you have another question, you should truly feel cost-free to get in touch with us.

The term “gearbox” is utilised to refer to any device that connects a motor to a machine and is composed of a collection of gears, also identified as a gear established. It receives the major enter speed from the motor and changes it to a different output pace using its gears. Various kinds and mixtures of gears provide certain reasons. The kinds of gears identified in gearboxes include spur gears, bevel gears, helical gears, helical gears and worm gears. The efficiency effectiveness of a gearbox is represented by the gearbox ratio, which is the ratio of the velocity of the enter source to the speed of the output resource

China Best Sales Worm Gearbox with Cast Iron Housing Single Double Speed Gear Box Reducer Reduction for Electric Motor (Wpa Wpx Wpo Wpda)     manufacturer

China Free Design Custom Jwb-X Series Speed Variator Gear Box manufacturer

Product Description

JWB Sequence Velocity Variator 
one. Functions:

 JWB-X  type

  • Sizes: ≥04
  • Power up to 1.5 kW or a lot more
  • Situations in RAL 5571 blue solid iron
  • Shafts: circumstance hardened and tempered metal.
  • Internal components: warmth-handled steel
  • Output velocity with 4 pole(1400r/min) motors: 2-10r/min4.7-23.5r/min15-75r/min20-100r/min, 28-140r/min, thirty-150r/min40-200r/min60-300r/min80-400r/min100-500r/min190-950r/min.
  • Output Torque value max 1002Nm
  • Silent, vibration-free of charge running
  • Bidirectional rotation
  • Manage handwheel positionable on either side
  • Slipping pace to max load at 5% 
  • Regulation sensibility: ,5 rpm 
  • Painted with blue epoxy-polyester powder 

 JWB-X B kind

  • Dimensions:01,02,03 and 04
  • Electrical power up to 1.5 kW or much less
  • Cases in die-cast aluminium alloy
  • Shafts: situation hardened and tempered steel.
  • Internal elements: heat-handled metal
  • Output pace with 4 pole(1400r/min) motors: 2r/min-20r/min4.7r/min-23.5r/min6.5-32.5r/min, 8-40r/min, 9-45r/min, 13-65r/min, 15r/min-75r/min18-90r/min, 25-125r/min, 28r/min-140r/min40r/min-200r/min60r/min-300r/min80r/min-400r/min100r/min-500r/min190r/min-950r/min.
  • Output Torque worth max 795 Nm
  • Silent, vibration-free running
  • Bidirectional rotation
  • Manage hand wheel positionable on possibly facet
  • Slipping speed to max load at 5%
  • Regulation sensibility: ,5 rpm
  • Painted with blue epoxy-polyester powder 

two. Technological parameters

 

Variety Output Torque Output Shaft Dia.   Output Pace Range 2rpm-950rpm
SWB01 two.6-1.6N.m φ11 Relevant Motor Energy .18kW-7.5kW
SWB02 258-1.8N.m φ14,φ24,φ28,φ32  
SWB03 426-4N.m φ24,φ28,φ38 Input Alternatives With Inline AC Motor
SWB04 795-8N.m φ28,φ38,φ42 With IEC Motor
SWB05 535-16N.m φ38,φ48,φ55 With Input Shaft
SWB06 1002-40N.m φ42,φ55,φ70 With Input Flange

About Us

ZheJiang SCZPT Generate Co.,Ltd,the predecessor was a state-owned armed forces mould organization, was proven in 1965. SCZPT specializes in the complete electrical power transmission remedy for high-finish gear production industries based mostly on the intention of “Platform Solution, Software Style and Specialist Support”.
SCZPT have a sturdy specialized pressure with above 350 employees at current, like above thirty engineering technicians, thirty top quality inspectors, covering an location of 80000 sq. meters and varieties of sophisticated processing equipment and tests equipments. We have a good basis for the business application development and services of high-end pace reducers & variators proudly owning to the provincial engineering techCZPT investigation centre,the lab of gear velocity reducers, and the base of modern R&D.

Our Team

High quality Management
Good quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

three. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

four. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

six. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
item is a product inspection to determine the qualified products.

7. Certification.

Packing

Shipping

Gearboxes and reducers are enclosed mechanical reduction devices generally used in present day automated manage techniques to command torque from your motors and complete other motion-relevant jobs. A gearbox allows you to increase torque although decreasing the speed of your key mover output shaft. The output shaft of the gearbox rotates at a slower velocity than the input shaft. This creates a mechanical benefit, rising torque. Conversely, your gearbox can be set in reverse, offering improved shaft velocity and reduced torque. Two frequent transmission configurations are straight and right angle. On the web designs usually consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic turbines. Appropriate-angle types generally use worm or helical gear drives, nevertheless, hybrid drives are also available. Gearmotors mix an enclosed equipment established with an electric powered motor to increase torque and overall performance while minimizing velocity. While further friction, inertia, or sharp load adjustments for short-term procedure of the actuator can trigger troubles, they offer a prolonged operating existence by stopping overloading. Various equipment ratios, speeds and torques are accessible to support optimize efficiency and reduce likely issues. Search to find the correct gearbox and reducer for your automation undertaking.

China Free Design Custom Jwb-X Series Speed Variator Gear Box     manufacturer